Tech Spotlight: Sensors
Modularity customizes pressure sensors
The MM series pressure transducers are available in gage, absolute, barometric, vacuum, compound, and differential styles, in ranges from 0 to 10 in. H
Omegadyne, 149 Stelzer Court, Sunbury, OH 43074, (740) 965-9340, www.info.hotims.com/24233-250
Big range for small profile
Ultrasonic sensor has a 40-cm sensing range and a 2.5-cm blind zone (an area directly in front of the sensor face in which objects cannot be detected because they are too close). The small-profile sensor mounts in narrow spaces, and it is available with retro-reflective and diffuse operation modes, and frequency modes.
Turck Inc, 3000 Campus Drive, Plymouth, MN 55441, (763) 553-7300, www.info.hotims.com/24233-251
Programmable encoders accommodate values from 1 to 65,536 PPR
The DFS60 series determines angles, positions, speeds, and accelerations in automation technology. The incremental encoders let system integrators and distributors select any line count from 1 to 65,536 pulses/revolution (PPR) via their computers using a programming tool. Users are also able to set the zero pulse width to 90°, 180°, or 270° and program the electrical interface to either HTL or TTL. Units are available in blind-hollow shaft, through-hollow shaft, and solid-shaft models, and have a mechanical design and a metal code disc for increased temperature tolerances.
Sick Stegmann, Inc, 7496 Webster Street, Dayton, OH 45414, (800) 811-9110, www.info.hotims.com/24233-252
Logger tracks temps in transit
A multifunction temperature logger and smart-label RFID device allows monitoring and receiving of temperature and humidity throughout the transport of sensitive substances, such as medicines and blood bags. The ZMD41211 has an on-chip passive transponder, temperature sensor, timer,and EEPROM. The logger has eight modes of temperature recording, and can make up to 720 temperature readings.
ZMD AG, Grenzstrasse 28, 01109 Dresden, Germany, +49 351.8822.668, www.info.hotims.com/24233-253
Submersible transmitters for low liquid levels
Submersible OEM pressure sensors provide hydrostatic low level measurement from 50 mbar (0.5 m water column) full scale. The KTE2000CS series consists of capacitive ceramic pressure cells in a stainless steel construction, and they are compatible with corrosive and aggressive liquids. The transmitters are calibrated and temperature compensated from -20 to +70C, and they provide a 4 to 20 mA output signal. A cable with vent tube lets a reference pressure get to the sensor element to eliminate errors due to atmospheric pressure changes.
Sensortechnics GmbH, Boschstrasse 10, 82178 Puchheim, Germany, +49 89 80083-48, www.info.hotims.com/24233-254
Want to use this article? Click here for options!
© 2012 Penton Media Inc.
Acceptable Use Policy blog comments powered by Disqus
Webcasts
- How to Quantifiably Confirm Cure of Light Cure Adhesives
Sponsored by: Henkel - View Webcast Archive
advertisement












